Views: 0 Author: Site Editor Publish Time: 2026-11-11 Origin: Site
A supplier can only quote cable tray accurately when it knows the tray type, size, thickness, material, coating, quantity, and the documents you need. Most delays come from missing information, not from the product: a request that says only "galvanized cable tray, 1,000 meters" leads to several rounds of questions before a real price can be given. A good RFQ covers eight things: project basics, tray type and size, material and finish, load and supports, fittings, commercial terms, documents, and attachments. This guide explains what to include in each part, and ends with a checklist you can copy into your own inquiry.
Faster quotes: the supplier can reply with a real price on the first reply instead of a list of questions
Accurate prices: thickness, coating, and size decide the steel weight and the process, which are the biggest items in the price
Fair comparison: when every supplier gets the same information, the quotes can be compared on the same basis
Fewer disputes later: what was asked for is written down, so what is delivered can be checked against it
Project name, country, and delivery destination
Project stage: tender, budget estimate, or ready to order
Required delivery date or construction window
Whether the order is one shipment or several phases
Whether you are the end user, a contractor, or a distributor
Item | What to provide |
|---|---|
Tray type | Perforated, solid-bottom (trough), ladder, wire mesh, or other |
Width | Each width you need, in mm |
Side-rail height (depth) | Each height you need, in mm |
Length of each piece | Standard length, or the length you prefer |
Thickness | Sheet thickness for each size, or the load requirement that decides it |
Quantity | Meters or pieces, listed by size |
If you have a bill of quantities, send it as a table, because it gives the clearest picture of what you need.
Material: pre-galvanized steel, hot-dip galvanized steel, stainless steel (304 or 316), aluminum, powder-coated steel, or other
Coating requirement, and the standard it follows, for galvanized products
For powder coating: the color and the coating requirement
Environment: indoor dry, damp, outdoor, coastal, chemical, or food area
Design life you expect
Cable types and quantities per tray, or the load you want the tray to carry
Support spacing you plan, or ask the supplier to propose one
Whether supports are in the scope: hangers, wall brackets, cantilever arms, floor frames, or channels
Any special requirement, such as vibration, wind, or seismic conditions
If you do not know the load, say so and give the cable types. The supplier can suggest a size, and the final selection should be confirmed by your engineer.
Bends (horizontal, vertical inside, vertical outside), tees, crosses, and reducers, by size and angle
Covers, and the cover type you need
Splice plates, bolts, and nuts, and whether they are included
Bonding jumpers and earthing parts, where required
Expansion joints and end caps, where the design calls for them
A routing drawing or a sketch makes counting fittings much easier. If you have none, ask the supplier how it will count them, and agree on a price per fitting.
Trade term you want quoted, and the delivery port or site
Payment terms you can offer
Required lead time, and whether partial shipments are acceptable
Packing needs: bundles, pallets, container loading, and marking per phase
Currency and the validity period you need for the quote
Material certificates, coating thickness records, and test reports you need, and the standard they should follow
Drawings, datasheets, or approval samples
Whether you want third-party inspection before shipment, and who will arrange it
Any certificate of origin or other import paperwork
Agreeing on documents before the order is much easier than after the goods are made. See our guide How to Import Cable Tray from China for how the full process works.
Bill of quantities or a size list in a spreadsheet
Routing drawing or layout sketch
Project specification pages for cable tray, where you can share them
Photos or samples of a product you want to match
Group | Items |
|---|---|
Project | Country, destination, stage, delivery date, phases, your role |
Tray | Type, width, side-rail height, length, thickness, quantity |
Material | Material, coating requirement and standard, color, environment, design life |
Load | Cable types, load, support spacing, supports in scope, special conditions |
Fittings | Bends, tees, crosses, reducers, covers, splice plates, fixings, earthing parts |
Commercial | Trade term, port, payment, lead time, packing, currency, validity |
Documents | Certificates, thickness records, test reports, drawings, inspection |
Attachments | Quantity list, routing drawing, specification, photos |
Asking for a price per meter with no size or thickness. Two trays with different thicknesses can have very different prices.
Writing "galvanized" and nothing more. State pre-galvanized or hot-dip, and the standard or the coating requirement.
Leaving out fittings. Bends, tees, and covers can be a large part of the final order, so list them or agree on how they are counted.
Sending different requests to different suppliers. The quotes then cannot be compared.
Forgetting documents and inspection. Ask for them in the RFQ, not after the order.
No destination. Freight and trade terms cannot be quoted without it.
A clear RFQ gets a faster, more accurate, and more comparable cable tray quotation. Give the project basics, the tray type and size, the material and coating, the load and supports, the fittings, the commercial terms, and the documents, and attach a quantity list and a drawing if you have them. Where information is missing, say so and ask the supplier to state its assumptions. Final selection should follow your project specification and the applicable standards.
At least the tray type, width, side-rail height, thickness or load requirement, material and finish, quantity, and delivery destination. With fittings, load, and document requirements added, the quote can be much more accurate.
Not always, but a routing drawing or sketch makes it much easier to count bends, tees, and covers. Without one, ask the supplier how fittings will be counted and priced.
Yes, if they are part of the order. Hangers, brackets, cantilever arms, and frames are priced separately from the tray, so include them in the quantity list and say which type you want.
Ready to request a quote? Browse our cable tray systems, hot-dip galvanized cable tray, and stainless steel cable tray, or contact us with your size list, material, and destination, and we will reply with a quotation and the questions we still need answered.
Whatsapp: +86-18823394830